L3200D Manual Transmission

KATHERINE AG > Products > Kubota > Tractors > L Series > L3200D Manual Transmission

L3200D Manual Transmission

L3200D

Manual Transmission

If you’re looking for a general purpose, mid-sized tractor that is durable, comfortable and high performing, you simply can’t go past the Kubota L3200D. Powered by Kubota’s own 26.7 PTO HP engine and featuring a mechanical shuttle transmission, the Kubota L3200 is incredibly powerful yet simple to operate. Loaded with features to increase productivity, comfort and durability, the Kubota L3200D has been specifically designed to go the distance, providing you with years of economical and dependable use.

View Brochure

LD3200 Specifications

L3200D L3200HD
Engine Type Indirect injection, vertical, water-cooled 4-cycle diesel Indirect injection, vertical, water-cooled 4-cycle diesel
Engine gross power HP (kW) 31.9 (23.8) 31.9 (23.8)
Engine net power HP (kW) 30.4 (22.7) 30.4 (22.7)
PTO power HP (kW) 26.7 (19.9) 25.2 (18.8)
No. of cylinders 3 3
Bore & stroke (mm) 83 x 92.4 83 x 92.4
Total displacement (cm³) 1499 1499
Rated speed (rpm) 2800 2800
Battery 12V, RC: 123 min, CCA: 490 A 12V, RC: 123 min, CCA: 490 A
Alternator 12V, 40A 12V, 40A
Fuel tank capacity (L) 38 38
PTO Rear PTO type Transmission driven with overrunning Live-continuous running
PTO/Engine speed 540/2430 540/2580
Hydraulic Lift control type Position control Position control
Main pump capacity (L/min) 26.6 26.6
PS pump capacity (L/min) 15.0 15.0
3-point hitch Category I Category I
Lift capacity at lift points (kg) 906 906
Lift capacity 24 in. behind lift points (kg) 651 651
System pressure kgf/cm² (MPa) 160 (15.7) 160 (15.7)
Travelling System Transmission Gear shift, 8 forward and 4 reverse Hydrostatic transmission, 3 range speed
Steering Integral type power steering Integral type power steering
Brake Wet disc type Wet disc type
Clutch Dry type single stage Dry type single stage
Tyre size AG (Standard) Front 7-16 7-16
AG (Standard) Rear 11.2-24 11.2-24
Turf (Optional) Front 212/80-D15 212/80-D15
Turf (Optional) Rear 355/80-D15 355/80-D15
Industrial (Optional) Front 27 x 8.50-15 27 x 8.50-15
Industrial (Optional) Rear 15-19.5 R4 15-19.5 R4
Travelling speed with standard AG tyres Forward (km/h) 1.8 – 22.0 0.0 – 23.6
Reverse (km/h) 2.4 – 7.9 0.0 – 21.2
Dimensions Overall length (w/o 3P) mm 2700 2700
Overall width (min. tread) mm 1400 1400
Overall height (w/Foldable ROPS) mm 2330 2330
Wheelbase (mm) 1610 1610
Min. ground clearance (mm) 340 340
Front tyre tread (mm) 1095 1095
Rear tyre tread (mm) 1115 / 1195 / 1290 1115 / 1195 / 1290
Min. turning radius (w/brake, 4WD disengaged) m 2.5 2.5
Weight (with ROPS) kg 1180 1190

 

LD3200D Loader Specifications

LA524AU
Matching Tractor L3200 / L3800
Maximum Lift Height (Pivot Pin) mm 2394
Clearance with bucket dumped (mm) 1795
Reach@maximum height (Dumping Reach) mm 589
Maximum Dump Angle (deg.) 40
Reach with bucket on ground (mm) 1796
Maximum Roll Back Angle (deg.) 45
Digging Depth (mm) 288
Overall Height in Carrying Position (mm) 1427
Lift Capacity (500 mm Forward, Max Height) kg 400
Bucket Roll-Back Force (Max Height) N 5259
Bucket Roll-Back Force (1500 mm) N 7903
Bucket Roll-Back Force (Ground Level) N 9084
Raising Time (Rated Flow) sec. 3.3
Lowering Time (Rate Flow) sec. 2.1
Bucket Dumping Time (Rated Flow) sec. 1.4
Bucket Roll-Back Time (Rated Flow) sec. 1.7

 

LD3200D Back Hoe Specifications

BH77
Matching Tractor L3200 / L3800
Transport height (mm) 2040
Stabilizer spread – transport (mm) 1315
Stabilizer spread – operating (mm) 1753
Ground clearance (mm) 292
Digging Depth 2ft flat bottom (mm) 2349
Operating height fully raised (mm) 3010
Loading height (mm) 1680
Reach from swing pivot (mm) 3156
Swing pivot to rear axle centre line (mm) 954
Bucket rotation (deg.) 180
Angle of departure per SAW J1234 (deg.) 17.5
Swing arc (deg.) 180
Digging Force using Bucket Cylinder (kgf) 1552
Digging Force using Dipperstick Cylinder (kgf) 993

Short Description

Categories: ,
Share on: